,

EDGE-X SERIES XLA 5

 High Output 2x 10 Inch LF + 1×1.4 inch HF , 2 Way Line Array speaker System

 

Features

  • High performance 2-way full -range line array system
  • Very high output coupled with clean and precise sound reproduction
  • Italian (B&C) drivers for superior performance and durability
  • 2 x 10-inch 400W high performance neodymium woofer in bass reflex design
  • 1 x 1.4-inch large format compression driver, horn-loaded for power and performance
  • Wide bandwidth, Extended bass response
  • Wide coverage 110° horizontal
  • Fast, Integral, high-strength rigging system
  • Common grid may be used for flying or ground stacking
  • Company pre-sets for a variety of applications

 

The EDGE-X XLA 5 is an externally powered, 2-way bi amplified line array module which integrates 2×10 inch low-mid and 1x 1.4-inch large format compression driver in a very compact design. The XLA 5 is as a medium format line array system, it brings line array performance benefits to a variety of medium and large-scale applications. It meets the need for a versatile, scalable system that can be flown or ground stacked for wide range of indoor and outdoor events.

 

The XLA 5 is suited to a wide variety of applications. Its full range capability it qualifies for applications where subwoofers are not required.

 

Low- mid frequency section employs 2 x10 inch high excursion neodymium cone drivers mounted in bass reflex configuration to ensure powerful low frequency performance. For High frequencies 1 x 1.4 inch exit large format compression driver is mounted on to a high frequency plane wave converter. The resultant planer wave is then coupled to a proprietary High frequency horn to ensure, wide dispersion, precise high frequency coverage and even arraying in all situations. The careful acoustic design, optimizes the wave front and eliminates mid-high frequency lobbing normally associated with 2-way line source systems.

 

The XLA 5 incorporates proprietary rigging systems on their sides for safe, easy and quick flying or stacking. The physical angles can be pre-set for a wider coverage before flying the system; permissible angles are from 0° to 12°. The XLA 5 trapezoidal shape and rear located splay angle adjusters maintains the front spacing the same, providing the array with a continuous front baffle, for improved array performance.

 

The EDGE-X XLA 5 meets the need for a versatile, scalable system that can be flown or ground stacked for corporate events, theatres, indoor and outdoor venues. It is also suitable as a delay system for large scale outdoor sound reinforcement.

 

Applications

  • Ideal for a wide range of portable and installed applications
  • Medium to Large scale sound reinforcement
  • Concert Halls, stadiums, auditoriums, Club sound
  • Delay systems for large scale outdoor sound reinforcement e.g. XLA 7 and XLA 9

Technical Specification

TYPE Two-way, compact line array element
FREQUENCY RANGE 55Hz-19kHz
DRIVERS   LMF 2 x 10-inch woofer, reflex loaded
                    HF 1 x 1.4inch exit HF Large format compression driver, horn loaded
RATED POWER LMF: 800W AES,3200W peak

HF: 120W AES, 4800w peak

SENSITIVITY 100dB LF / 110 dB MHF
MAXIMIUM SPL (CALCULATED @ IM) LMF:133dB continuous, 139dB peak

HF: 138dB continuous, 142dB peak

NOMINAL IMPEDANCE 16 ohms LF, 16 ohms HF
DISPERSION (-6db) 110º horizontal x 12º vertical
ENCLOSURE Vertical trapezoid, BWP ply construction
FINISH Lloyd Lee Co. weather resistant textured paint cover
PROTECTIVE GRILLE Perforated Steel Powder Coated, 16G .
CONNECTORS 2 x Neutrik NL4
DIMENSIONS — mm x — mm x — mm  ( W x H x D)
WEIGHT — kg

Download