LC SERIES |
348978
product-template-default,single,single-product,postid-348508,theme-moose,eltd-cpt-2.2,woocommerce,woocommerce-page,woocommerce-no-js,ajax_updown_fade,page_not_loaded,,moose-ver-3.3, vertical_menu_with_scroll,smooth_scroll,grid_1300,woocommerce_installed,blog_installed,columns-4,wpb-js-composer js-comp-ver-7.2,vc_responsive

LC SERIES

Digital Power Amplifiers

 

Features:

 

  • Small size, lightweight 4 channels amplifier
  • Worldwide operational range of mains voltage
  • Output power and sound quality are independent from Mains changes in very wide range (85Vac — 275Vac)
  • Strong double resonant power supply with PFC
  • High output power and good pulse response
  • Built-in U / I / no-clip limiters
  • Bridged configuration ability
  • High power conversion efficiency ,low thermal emission
  • Improved reactive power handling/recycling capability
  • 2way selectable fixed frequency hi/low-pass crossover
  • Intelligent protective functions
  • Two steps of built-in High frequency protection
  • Soft-start, line overvoltage protection, 400VAC proof
  • Large internal energy storage
  • Cooling fans are hidden deep in the case, less noisy
  • Rugged steel chassis in compact size
  • No need for cooling air jamming filters, non moisture sensitive cooling structure design, “Tropicalized”
  • Designed and manufactured in the European Union (HUNGARY)

 

 

Category:

Technical Specification

ParameterPKN LC-4004UPKN LC-10004U  New!
Channel number4 input / 4 output
Power requirements85V – 270VAC, 45 – 56 Hz or 85V – 270VDC*  (400Vac proof**)
Max. Power consumption25 A50A
Typical Mains requirement with music signal12A (110Vac), 6A (230Vac) “Fuse type-B”20A (110Vac) , 10A (230Vac) “Fuse type-B or C”
Min. mains operational Voltage (prior UVLO activated)59Vac
Max. mains operational Voltage (prior OVLO activated)290Vac
Soft startingyes, very soft power-up sequence
Power SupplyHigh frequency resonant includes active PFC
Mains power factor > 0.94 (above 250W)
Mains connection25A Neutrik Powercon32A Neutrik Powercon
Working temperature range0C – 45C
Storage temperature range-25C – 60C
Maximum Peak Output Voltage (per channel)105Vp155Vp
Output power @ 8 Ohms4 x 500W4 x 1200W
Output power @ 6 Ohms4x 660W4 x 1600W
Output power @ 4 Ohms4 x 1000W4 x 2100W
Output Power @ 2.7 Ohms4x 1500W4 x 2700W
Output power @ 2 Ohms4 x 1600W4 x 2600W
Bridged power @ 8 Ohms2 x 2000W2 x 5000W
Bridged power @ 4 Ohms2 x 3000W2 x 6000W
Minimal load impedance2 Ohms
Frequency (+/- 3dB, 8 Ohms)5 Hz – 36 kHz
Slew rate (Input HF filter bypassed)50V / us
Damping factor ( 8?, range of 20Hz- 150Hz)>2000>2500
Output Peak Current (per channel)44Ap56Ap
End stagesPKN Improved fixed switching frequency Class D with true output feedback, reduced output HF carrier ripple circuitry
Output connectionFour pole Neutrik Speakon (1+2+ in parallel 1-2- parallel)
Effective sample rate per channel250KS/s
Gain ( Front knobs at 0dB)39dB42dB
Signal to noise ratio104 dB106 dB
Nominal sensitivity for max. output level (balanced)700 mV (rms)
Input impedance (referred to ground)10 kOhms + 10 KOhms ( +/- 1% )
Input terminalsNeutrik XLR
Built in limitersMax. output level, output current, signal no-clip, sustained high-frequency, intelligent over temperature
CrossoverSelectable fixed frequency 100 Hz HI-PASS filter, 120 Hz LO-PASS filter, 160 Hz LO-PASS filter
Output level metersSIGNAL, AGR, PROTECTION, TEMP, READY LEDs
ProtectionsShort circuit, Overload, Low impedance, thermal, DC fault, High-frequency
CoolingForced air cooling with regulated, temperature dependent  DC fans hidden in the case for reduced FAN noise level
Direction of air flowFront to rear
Bridged configuration abilityyes
Remote
Weight9 Kgs11.6 Kgs
External dimensions19″ rack 483 x 460 x 44mm (1RU)

 

Product Table

PKN LC-4004U    4x 1000W 4R | 4x 1600W  2R

PKN LC-10004U   4x 2100W 4R | 4x 2700W 2.7R

Download