S10004 |
348978
product-template-default,single,single-product,postid-413858,theme-moose,eltd-cpt-2.2,woocommerce,woocommerce-page,woocommerce-no-js,ajax_updown_fade,page_not_loaded,,moose-ver-3.3, vertical_menu_with_scroll,smooth_scroll,grid_1300,woocommerce_installed,blog_installed,columns-4,wpb-js-composer js-comp-ver-7.2,vc_responsive

S10004

The S series are designed especially for highly demanding touring environment where live sound hire companies push the threshold of high-power performance vs reliably to its extreme. All S Series amplifiers are built around the same core technologies, including Class TD output stage, R. SMPS regulated switch-mode power supplies, and highly efficient heat dissipation systems S series amplifiers have the same signal flow, and the same feature sets.

Category:

S 10004 is a 4-channel amplifier that incorporates state of the art voltage regulation technology for more dynamic power.

 

The S series is equipped with an advanced protection system, which includes power soft start, DC overload, short circuit, overheating, ultra-high frequency, clipping and in particular no relay output protection that has a rapid response which no relay can match. U series amplifier can deliver sound without interruption at even high ambient temperature situations.

 

Excellent heat dissipation system, S series amplifier are designed with high efficiency short-range duct double Copper ribbon heat sink, to ensure excellent heat dissipation and unmatched performance as compared to aluminium heat sinks.

 

The input stage of all S series amplifiers has a high sensitivity to provide ample system headroom. This in effect means that the input stage is almost impossible to clip. Built in adjustable Voltage Peak Limiter (VPL) sets the maximum output voltage and therefore also the maximum output power. The sophisticated output section monitors faults and generates appropriate warnings, which are displayed on the amplifier front panel These alerts allow the operator to adjust system settings and thereby avoid failures.

 

Whether it is Touring or fixed installation, S series amplifier suits the most demanding applications due to its small size, low weight, high efficiency, high power and high reliability.

Features

  • 4 channel amplifier, 4 x 2200w@4ohms per channel
  •  State of the art technology provides exceptional reliability when working with up to 2-ohm impedance
  • Excellent handling of low frequencies as well as clear mid and highs
  • high efficiency short-range duct double Copper ribbon heat sink
  • Optimized power supplies, filter and heat sinks for better low end, transparency and stability
  • Comprehensive protection circuitry (short, overheat, Dc, subsonic and RF filters turn-on delay) with high current speakers protection relays.
  • Flexible input configuration with active balanced inputs, additional input connectors to chain amps
  • True clip LEDs for better control
  • Front-to-Rear airflow with 2speed fan control
  • Efficient heat sink design for thermal stability and reliability
  • Turn-on in-rush current limiting circuitry
  • Steel reinforced chassis construction for durability and longevity.

 

Application

  • Live Sound (Small to Large scale sound reinforcement)
  • Auditorium
  • Club sound
  • Portable DJ systems
  • Installations

 

Technical Specification

ModelS10004
Output Power 1KHz, <0.05%THD
8-ohm Power4x1300W
4-ohm Power4x2200W
2-ohm Power4x2400W
8-ohm Bridged Power2x4400W
4-ohm Bridged Power2x4800W
THD (20Hz-20kHz for 1W)<0.1%
THD (1kHz and 1dB below clipping<0.05%
DSP ProcessorNA
Gain (optional)23、26、29、32、35、38、41、44dB
Signal Noise Ration110dB
Frequency Response(+/-0.1dB)10Hz-34kHz
Damping coefficient>500
Impedance (balanced/unbalanced)20KQ/10KQ
Output socketSpeakon Connectors (NEUTRIK)
Input socketCombo XLR type,3pin (NEUTRIK)
Link socketXLR type,3pin male (NEUTRIK)
ProtectionShort circuit, open circuit, thermal, overload, DC, super audio protection
Power Requirement200-240V 〜50-60HZ
Size (W x H x D)483x445x88mm
Weight(net)16.5Kg

 

Translate »